Professional Studio Broadcasting Recording Condenser Microphone Kit

Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp Kit

Polar Pattern: Uni-directional
Frequency Response: 20Hz~20kHz
Sensitivity: 45dB±1dB
Output Impedance: 1500Ω±30%(at 1kHz)
Load Impedance: ≥1000 Ω
Equivalent Noise Level: 16dBA
Electrical Current: 3mA
Microphone Output Interface: 3.5mm (0.14 Inch)
Usage Voltage: 48V phantom power supply
Wire: 3.5 inserted audio interface, 3 meters long
Microphone Body Weight: 0.51lb
Size: Approx. 16 x 5 x 5cm (6.3 x 1.97 x 1.97inch)
Microphone Material: Steel net + Zinc alloy hand holding part

Pop Filter---
External Diameter: 155mm(6.10inch)
Function: Reduce P-pops in recording
Double-layer Net Diameter: 130mm(5.12inch)
Tube Length: 375mm(14.76inch)
Tube Diameter: 8mm(0.31inch)
Mounting Clamp: Up to 35mm(1.38inch)(Clamp adjustable)
Flexible Holder: 360 degree swivel mount

Material: Steel
Arm Stand Weight: 850g(1.87lb)
Each Arm: 36cm(14.1inch)
Arm Stand Support: Up to 2kg(4.41lb)
Double-braced Arms: Add strength
Features: Stable, tough, and affordable
Steel Construction: 9x9mm(0.35x0.35inch) cross-section
Mount Base: Installed onto the desk up to 55mm(2.17inch) thickness
Mount on: announcers’ desk with the metal mounting base
XLR Male to Female Microphone Cable: Pre-installed hidden inside the boom arm tubing
1. Mount onto the stand
2. Screw to adjust the angle
Warm prompt:
Generally, the default pull positioning button is setting in screw hole with primary requirement. If you need to enhance the bearing burden of suspension arm stand, you can lock the pull positioning button to different screw hole so that you can enhance the stretch strength of the outer spring, then you get the effect.
The illusration shows:
1. The base standard part installation;
2. Suspension arm link with the base standard part;
3. Locating the arm direction, tighten the nut;
4. One end of spring link with pull positioning button;
5. Shock mount link with the arm;
6. Locating the stand to where you need;
7. Put the microphone into clamp ring of shock mount

Brand Miimall
Model MP800
Quantity 1 set
Material Steel net + zinc alloy hand holding part
Interface 3.5mm
Powered By Power Free
Microphone Frequency Response 20Hz~20kHz
Sensitivity 45dB±1dB
Mic Polar Patterns Cardioid
Impedance UP 1000ohm
Packing List
1 x Microphone 1 x Shock mount 1 x Power cord 1 x Anti-wind foam cap 1 x Microphone pop filter wind screen 1 x Arm stand body 1 x Clip 1 x Mounting base 1 x Screw nut 1 x XLR male to XLR female cable 1 x User manual

Packaging Details
  • Unit Type:set
  • Package Weight:1.4kg (3.086lb)
  • Package Size:40cm x 16.2cm x 9cm (15.75in x 6.38in x 3.54in)
  • Vendor: Mimall
  • Type: Unknown Type

You may also like